31 posts tagged with "rqg"

Make damage bonus part of weapon damage string​

 #106

In previous versions the system tried to figure out if full, half, or no damage bonus should be added to the weapon damage by looking at if it's a melee, thrown or missile weapon. This worked for the majority of weapons, but could not capture exceptions like sling that is a projectile weapon, but anyway should get half damage bonus.

Starting with this version you need to add +db or +db/2 to the damage string of the weapon if you want it to include a damage bonus. The damage listed in the Weapons & Equipment books are expressed in the same way (except they write halv damage bonus like +½db).

There is a migration included that should update all existing damage strings.

Make runes translatable by using rqid for linking​

 #270

Previous versions used the name of rune items for linking to them, with this change the rqid of the runes are used instead. This should make it possible to translate the name of the runes.

The links that were changed was; opposing & minor runes links in the rune item, cult item runes, rune magic item runes, and skill runes (used for sorcery spells until a dedicated sorcery spell item type exists). With this change the system setting for the name of the magic rune was removed and the rqid of the magic rune is now a CONFIG instead (set to i.rune.magic-condition by default).

There are migrations for all the item changes needed for this.

Improvements to the rqid editor​

 #457  #642

The Rqid editor field for the id now autofills the part of the id that fully depends on the document type. It also handles setting language and priority better when creating a new rqid. You will get default values for that when you set a rqid.

The info display, as well as the list of other items with the same rqid now has an improved display of what folder the document is located in.

Hide Opposing / Minor rune settings depending on runeType on Rune Item Sheet​

 #269

The settings for opposing and minor runes in the rune item sheet are now only shown when they are relevant according to the type of the rune.

Bug fixes​

• Name of special damage in chat damage roll is impale even for slash damage  #629
• Actor without POW / MP is shown as unconscious and also show MP input field  #631
• Null exception if hit location lacks rqid flag "id" when dragged to actorSheet
• Combat panel SR button is not right aligned for natural weapons

The previous release contained a serious bug that prevented actor sheets to be opened if there were not any ongoing combat.

Bug Fixes​

• Impossible to open character sheets  #627
• Missing translation on weapon itemSheet

Move system compendiums into a separate wiki module​

 #597  #598

Having the compendiums as a separate module, one per language, mean a lot less compendiums in the system in the future when we have multiple languages. It also simplifies the administration of what set of wiki you want since it will be handled by activating / deactivating modules instead of specialised settings in the system. Having them as a separate module also simplifies releasing updates since the module can be released independently of the system.

The previous compendium packs were built for the previous Foundry database NeDB, but the new wiki module builds database files for the v11+ database "classic level" so Foundry does not need to convert them at startup anymore.

Add SR buttons to actor sheet​

 #620

For linked actors that currently are in combat there is now a row of 12 SR buttons. Clicking one of those will add a combatant to the current combat tracker at that SR, and clicking it again will remove it. There is also a ⓘ icon with a tooltip that has a reminder about how many SR various actions take. The DEX SR and SIZ SR are visualised by background color as an aid when using this.

Reset Initiative removes duplicate combatants​

 #509

The top of the combat tracker is updated so that the "Reset Initiative" ↺ button clears all duplicate combatants and their SRs. The previous buttons "Roll All" & "Roll NPCs" are removed since they make no sense for RQG.

Missile weapon SR buttons​

 #510  #504

Missile weapons now have buttons for populating the combat tracker at the SRs they can shoot. For weapons with rate S/MR there are two buttons depending on if you start the round with a loaded arrow or not. The Range and Rate of missile weapons are now shown, both on the combat tab and on the gear tab.

Actor name extendedName field​

 #549

The actor name is now divided into the name field and an extendedName / epithet field. The intended use is to keep the name short since that is what is displayed in sidebars, chat etc. The epithet field could then be used for family names or descriptive addons like "son of Herila" or "the dragon slayer". As part of this change the layout of the header was also updated, and if the actorsheet width is reduced the image is hidden to conserve space.

Integration with module Drag Ruler​

 #618

If you have the module Drag Ruler active then you will get feedback on how far you can move your token. By default the green color means you are within attack range, a yellow color means you can get there but cannot attack. Red color means you cannot get there.

There is also support for an optional rule that lets you sprint further than your MOV. See "Speed Provider" settings in the drag ruler module settings.

Smaller bug fixes, features and refactorings​

• Actors now fall unconscious when they reach zero magic points  #414
• CON 0 gives wrong Max ENC  #610
• Improve restart settings code  #616
• Improve Active Effect tab by showing a link to the item an AE originates from  #617
• add translations for sheet names (items, actor & rollTable)
• fix error message for non integer ENC Factor values
• make default item icon colors black in the settings dialog

New hit location view for humanoids and improved wounded indications​

 #290

For actors with humanoid hitlocations the display is now more graphical. For this to work the hitlocations need correct rqids, and that can be fixed with the supplied macro RuneQuest Glorantha | en/Macros & Rolltables/Rqid Macros "Set Hit Location Rqids", that was added in the last release.

System compendium packs are now organized into folders​

 #578

The handling of compendiums in Foundry 11 is much improved and this release takes advantage of the new abilities by organizing the supplied system compendium packs into folders.

Migrate Active Effects to foundry 11​

 #594  #602

Active Effects have changed in Foundry 11 and RQG now follows the new standard of not copying the active effects from the items to the actor. Instead they remain on the items, and it is also possible to edit acive effects even on embedded items. The "hidden" AE debug tab that shows active effects that affect an actor has been updated to take this into consideration. Also the item sheets no longer hide the active effect tab on embedded items. Note: To see the active effect tab run CONFIG.RQG.debug.showActorActiveEffectsTab=true in the f12 browser console.

BUG: Rune magic should not be accessible for cult laymembers​

 #593

If you are not initiated into a cult you should not have access to the cults common rune magic. If you only have laymember status in a cult the rune magic table is now hidden.

Improve UX of MOV and relocate the ENC display to the gear tab​

 #516

The MOV / ENC display in the actor sheet header has been too complicated. This tries to simplify it by concentrating on shoving MOV only there. The max / equipped % carried ENC is shown on the gear tab instead.

GM view

Player view

MOV tooltip

ENC display

Make it easier to see if a skill can get experience or not​

 #476

On the skill tab there is now a "pen" icon on the skills that can not be improved by experience, but has to be studied to improve. This should make it more obvious why you don't get an "experience" glow on some skills.

Show parent document name on itemSheets title​

To make it easier to know what item sheet you are looking at the actor name is now shown in the title.

Show a warning if the hit locations don't add up​

 #499

If an actor has a set of hit locations that do not cover the full range of the d20 hit location die, or if there are hit locations that overlap there will now be a warning displayed to make it more obvious that the actor is not correctly set up.

Add tooltip to rqid window button​

 #455

The titlebar rqid icon is moved to the left side, next to the Foundry id icon. Also it is no longer necessary to open the rqid window to see what rqid the document has, since that information is now shown as a tooltip.

Various minor tweaks for Foundry v11​

• fix: icon color in compendiums is wrong in v11  #585
• fix: foundry v11 warns about Item translation  #583
• feat: use Foundry font definition for Norse font  #595

A number of bug fixes, and "behind the scenes" eslint was added to the build. That should improve code quality going forward, but it also meant that more or less every file has changes.

Bug Fixes​

• embedding a weapon shows a warning for usages without linked skill  #591
• runes in sorcery tab should not display chance  #586
• system background is broken (in Foundry v11)  #579
• system compendiums are missing embedded (descendant) documents (in Foundry v11)  #588
• weapon chat shows all usages regardless if it has the skill or not  #590
• weapon skills not added to actor in some cases  #589

Fixed bugs:​

• add missing scorpion man hitlocation items  #575
• migration is run for new worlds  #573
• replace the broken hitlocation rqid setter form with a macro  #576
• update compendium hit-location rqids to new standard form  #576
• skillSheet & HitLocationSheet is missing values  #572
• wrong rqid on i.skill.fists-fist in compendium  #574
• show a rqid form for rune items  #577

Set Hit Location Rqids Macro​

There has been a design change in how the rqids for hit locations should be constructed. Now the system default syntax is for example i.hit-location.left-leg and there is a macro in the compendium "Rqid Macros" called "Set Hit Location Rqids" that can set the correct rqid on all hit-locations (even on those that already has a rqid set).

This syntax is expected by the token effect for protection, so to make that work this macro needs to be run, and at least the humanoid hitlocations needs to be updated.

This macro will list RQG hit location names and let you match them to the location names from the system settings by drag-n-drop. Yellow background means that the name does not exist as a setting. That might be fine if you do not have any creatures that need that hit location. It could also be because you have translated the hit location to another language so that they don't match the English names.

Drag the names from the right setting table to the corresponding hit location. If you are missing a hit locations to drag from, just add them to the system hit location setting, and rerun this macro.

When "Update" is clicked, all hit location items in compendiums, world and scenes will get the standard Rqid for that hit location.

This release fixes the errors Got unexpected item type in assert, undefined ≠ skill. There was a missed line that still used the old style of weapon to skill links.

The search for item Rqids embedded in actors in compendiums was really slow. This release should fix that.

This is an even smaller followup bugfix release. If you have an actor compendium with embedded items with the old active effect style, the migration crashes. This release should fix that.

This is just a small followup bug fix release.

The major fix is that the pre migration form now updates items in compendiums, both item compendium packs and actor pack with embedded items. The downside of this is that it takes longer time to run, but it is only run during migrations so hopefully it wont be too annoying. There is a known bug left - it does not update items inside token actors on a scene. Foundry v11 has done updates to how they work and I will wait to see how it works out in that version before fixing that.

The other fix is that the token actor effects duration now is defined as seconds instead of rounds. That means they will disappear even if the combat tracker is not active, but the game time moves forward (assuming you have the module "Times up").

There are also a few other minor bug fixes included.